Blauberg Primo 355-400 AC & EC

Inline fans for supply and exhaust ventilation of various commercial and industrial premises requiring powerful air flow.The fans are compatible with ∅ 355 and 400 mm air ducts.New product combines wide capabilities and high performance features of axial and centrifugal fans, providing powerful air flow.

The fan casing is made of polymer and reinforced with a metal housing. Due to the conically shaped polymer impeller with specially profiled blades, the air stream circular velocity increases, which results in higher air flow and pressure, as compared to characteristics of standard axial fans.The specially designed diffuser, impeller and airflow rectifier at the fan outlet provide smooth air flow distribution and enable the best combination of high capacity, powerful pressure and low noise.The fan casing is equipped with an airtight terminal box for connection to power mains.

The AC fans are controlled by either a three-stage CDPE-3 E5 controller or a smooth thyristor controller connected to the maximum speed terminal. EC models are regulated by a smooth 0-10 V controller.

The fans are equipped with three-speed four-pole asynchronous motors or energy efficient EC motors.220–240 V single phase at 50 Hz.All motors have a sealed ball bearing motor with a service life of up to 40,000 hours, are 2 speed with an exterior two speed switch.All motors have manual reset thermal overload protection as required for inline duct fans AS/NZS60335-2-80:2004.

The fans may be mounted at any place and at any angle within the ductwork system. Several fans may be installed in one system in parallel to attain higher air capacity or in series to increase operating pressure in the system. The fan casing is equipped with fixing brackets for suspended mounting.