Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy
Language: EN

Blauberg Turbo

  • Description
  • Modifications
  • Downloads
  • Designation key
Description
Description
USE

Supply and extraction ventilation of offices, bathrooms, toilets, laundries, kitchens, ensuites in apartments, hotels, homes and commercial buildings.Ventilation air ducts requiring high pressure, powerful air flow and low noise level.Compatible with ∅ 100 up to 315 mm round air ducts.

DESIGN

The casing is made of low flammable polypropylene.Ventilation unit with terminal box. Can be turned to any position.Special design of the casing permits easy dismantling of the impeller and motor block for fan servicing without dismantling the air duct.

MOTOR MODIFICATION

220–240 V single phase at 50 Hz.All motors have a sealed ball bearing motor with a service life of up to 40,000 hours, are 2 speed with an exterior two speed switch.All motors have manual reset thermal overload protection as required for inline duct fans AS/NZS60335-2-80:2004.100 mm & 125 mm fans cannot be speed controlled.

T: turn-off delay timer adjustable from 2 to 30 minutes.G: speed controller, temperature controller with external temperature sensor (cable length 4 m), power cable with Australian plug.

WIRING

Comes with a 1.2 m lead, 2 pin plug and external two speed switching.Timer fans come with a 1.2 m lead, 4 pin plug and external two speed switching.

MOUNTING  
Due to the compact design the fan is the ideal solution for mounting in limited spaces, including space behind a false ceiling.The fan can be installed in any section of the ventilation system from intake to the end of the ductworks.Wall or ceiling mounting with a mounting plate.

TD: mounting kit for installation of one diameter fans in parallel (for boosting capacity).

TL: mounting kit for installation of one diameter fans in series (for boosting pressure).
Modifications
Modification name
Turbo 100
Turbo 125
Turbo 150
Turbo 200
Turbo 250
Turbo 315
+
+
+
+
+
+
Documents archieve
Documents archieve
Select a document type
  • Catalogues
  • Technical documentation
  • Certificates
Name
Turbo - data sheet (pdf 998.45Kb)
Turbo - user's manual (pdf 1.63Mb)
Turbo 100 - image (png 460.33Kb)
Turbo 125 - image (png 486.53Kb)
Turbo 150/160 - image (png 473.69Kb)
Turbo 200 - image (png 461.02Kb)
Turbo 250 - image (png 444.25Kb)
Turbo 315 - image (png 434.96Kb)
Data according to Commission Regulation (EU) 327/2011 (pdf 102.52Kb)
Turbo, Turbo E - certificate LVD (pdf 129.5Kb)
Designation key
Designation key
Series Duct diameter [mm] Modifications
Turbo 100; 125; 150; 200; 250; 315 T: turn-off delay timer adjustable from 2 to 30 minutesG: speed controller, temperature controller with external temperature sensor, power cable with Australian plug