Residential fans
Industrial fans
Single-room air handling units with heat recovery
Air handling units with heat recovery
Air distribution
Ducting
DampersBlauberg Turbo 150
EAN4058448018343 - Description
- Characteristics
- Downloads
- Dimensions
- Designation key
- Capacity diagram
| USE | DESIGN | |||
|
Supply and extraction ventilation of offices, bathrooms, toilets, laundries, kitchens, ensuites in apartments, hotels, homes and commercial buildings.Ventilation air ducts requiring high pressure, powerful air flow and low noise level.Compatible with ∅ 100 up to 315 mm round air ducts. |
The casing is made of low flammable polypropylene.Ventilation unit with terminal box. Can be turned to any position.Special design of the casing permits easy dismantling of the impeller and motor block for fan servicing without dismantling the air duct. |
|||
| MOTOR | MODIFICATION | |||
|
220–240 V single phase at 50 Hz.All motors have a sealed ball bearing motor with a service life of up to 40,000 hours, are 2 speed with an exterior two speed switch.All motors have manual reset thermal overload protection as required for inline duct fans AS/NZS60335-2-80:2004.100 mm & 125 mm fans cannot be speed controlled. |
T: turn-off delay timer adjustable from 2 to 30 minutes.G: speed controller, temperature controller with external temperature sensor (cable length 4 m), power cable with Australian plug.  |
|||
| WIRING | ||||
|
Comes with a 1.2 m lead, 2 pin plug and external two speed switching.Timer fans come with a 1.2 m lead, 4 pin plug and external two speed switching. |
||||
| MOUNTING | ||||
| Due to the compact design the fan is the ideal solution for mounting in limited spaces, including space behind a false ceiling.The fan can be installed in any section of the ventilation system from intake to the end of the ductworks.Wall or ceiling mounting with a mounting plate. | ||||
|
||||
|
TD: mounting kit for installation of one diameter fans in parallel (for boosting capacity). |
TL: mounting kit for installation of one diameter fans in series (for boosting pressure). | |||
 |
 |
|||
| Parameter | Тurbo 150 min | Turbo 150 max | Measurement unit |
|---|---|---|---|
| Voltage | 230 | 230 | V |
| Phase | 1 | 1 | ˜ |
| Frequency | 50/60 | 50/60 | Hz |
| Power | 42 | 50 | W |
| Current | 0.19 | 0.22 | A |
| RPM | 1940 | 2620 | min-1 |
| Maximum air flow | 119 | 156 | l/s |
| Maximum air flow | 430 | 560 | m³/h |
| Sound pressure level at 3 m distance | 37 | 41 | dBА |
| Max. operating temperature | +60 | +60 | °С |
| EC motor | no | no | - |
| Ingress protection rating | IPX4 | IPX4 | - |
| Casing material | plastic | plastic | - |
| Outdoor mounting | no | no | - |
| Sound-insulated casing | no | no | - |
| Air duct | for round air ducts | for round air ducts | - |
| Connection diameter | 150 | 150 | mm |
| Design | mixed-flow | mixed-flow | - |
| Type | Exhaust, Supply | Exhaust, Supply | - |
| SEC class | B | B | - |
| Weight | 3.18 | 3.18 | kg |
| Mounting | Inline | Inline | - |
| ErP | 2018 | 2018 | - |
| Type | Dimensions [mm] | ||||
| ØD | ØD1 | B | H | L | |
| Тurbo 150 | 148 | 187 | 220 | 251 | 289 |
| Series | Duct diameter [mm] | Modifications |
| Turbo | 100; 125; 150; 200; 250; 315 | T: turn-off delay timer adjustable from 2 to 30 minutesG: speed controller, temperature controller with external temperature sensor, power cable with Australian plug |
