Blauberg KOMFORT Ultra S3 250-E S3 white
- Capacity diagram
- Designation key
Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.Heat and humidity recovery reduces ventilation heat losses in the cold season and the load on the air conditioners in the hot season.Control of air exchange for creating comfortable indoor microclimate.Compatible with round ∅ 125 mm air ducts.
The casing of the unit is made of double skinned white painted metal panels, internally filled with 20 mm, mineral wool layer for heat- and sound insulation.The spigots for connection to the air ducts are located at the side of the unit.The hinged panel of the casing ensures easy access to the unit internals for service works including cleaning, filter replacement, etc.
Asynchronous external rotor motors and centrifugal impellers with backward curved blades are used for air supply and exhaust.Integrated motor overheating protection with automatic restart.Dynamically balanced impellers.Equipped with ball bearings for longer service life.Reliable and quiet operation.
|HEAT RECOVERY||AIR FILTRATION|
The KOMFORT Ultra S3 250-E S3 white unit is equipped with a plate enthalpy cross-flow heat exchanger made of polymerized cellulose that recovers heat and humidity.Due to humidity recovery the enthalpy heat exchanger produces no condensate.The air flows are fully separated within the heat exchangers. Odours and contaminants contained in the extract air are not transferred to the supply air flow.Heat recovery is based on heat and/or humidity transfer through the plates of the heat exchanger. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes heat losses, which reduces the cost of space heating.In summer the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cooled extract air. This reduces load on air conditioners and saves electricity.In summer, when the indoor and outdoor temperature difference is low heat recovery is not reasonable. In this case the heat exchanger can be temporary replaced with a summer block for warm seasons (available separately).
Two built-in G4 and F8 filters provide efficient supply air filtration.The G4 filter is used for extract air filtration.
|CONTROL AND AUTOMATION|
Turning the unit on/off from the control panel.Selecting ventilation mode – three speeds: minimum, medium, maximum.Freeze protection of the heat exchanger by means of turning off the supply fan during defrosting.
The units can be fixed to the wall, ceiling or mounted on the floor using the mounting brackets.While mounting provide free access to the service panel for filter replacement and servicing.Due to universal casing design both left and right mounting is possible. It requires swapping the service and the back panel.
|Parameter||KOMFORT Ultra S3 250-E S3 white||Measurement unit|
|Maximum air flow||81||l/s|
|Maximum air flow||290||m³/h|
|Sound pressure level at 3 m||28-47||dBА|
|Insulating material||20 mm mineral wool||mm|
|Transported air temperature||-25...+60||°С|
|Heat recovery efficiency||50-73||%|
|Heat exchanger type||cross-flow||-|
|Humidity recovery efficiency||27-45||%|
|Heat exchanger material||polymerized cellulose||-|
|Connected air duct diameter||125||mm|
|Air duct||for round air ducts||-|
|Type||Supply and exhaust||-|
|Mounting||ceiling mounting, wall mounting||-|
|Series||Unit type||Spigot modification||Modification||Rated air flow [m³/h]||Heat exchanger type||Control||Casing|
|KOMFORT||Ultra: compact unit||S: vertical spigot orientation||3||250||-||E: energy recovery||S3: multi speed switch||white: painted steel|
|KOMFORT Ultra S3 250-E S3 white|
|G4 panel filter||FP 240x184x40 G4|
|F8 panel filter||FP 240x184x40 F8|
|Backdraft air damper||VRV 125|
|Air damper||VK 125|
|Summer block||SB C4 200/240|
|KOMFORT Ultra S3 250-E S3 white||125||300||443||490||713||43|