Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy
Language: EN

Blauberg KOMFORT Ultra L3 250-E S3 white


Compact heat recovery air handling units. Maximum air flow up to 290 m³/h.
EAN codeEAN
  • Description
  • Characteristics
  • Downloads
  • Capacity diagram
  • Designation key
  • Accessories
  • Dimensions
Description
Description
FEATURES

Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.Heat and humidity recovery reduces ventilation heat losses in the cold season and the load on the air conditioners in the hot season.Control of air exchange for creating comfortable indoor microclimate.Compatible with round ∅ 125 mm air ducts.

DESIGN FANS

The casing of the unit is made of double skinned white painted metal panels, internally filled with 20 mm mineral wool layer for heat- and sound insulation.The spigots for connection to the air ducts are located at the side of the unit.The hinged panel of the casing ensures easy access to the unit internals for service works including cleaning, filter replacement, etc.

Asynchronous external rotor motors and centrifugal impellers with backward curved blades are used for air supply and exhaust.Integrated motor overheating protection with automatic restart.Dynamically balanced impellers.Equipped with ball bearings for longer service life.Reliable and quiet operation.

HEAT RECOVERY AIR FILTRATION

The KOMFORT Ultra L3 250-E S3 white unit is equipped with a plate enthalpy cross-flow heat exchanger made of polymerized cellulose that recovers heat and humidity.Due to humidity recovery the enthalpy heat exchanger produces no condensate.The air flows are fully separated within the heat exchangers. Odours and contaminants contained in the extract air are not transferred to the supply air flow.Heat recovery is based on heat and/or humidity transfer through the plates of the heat exchanger. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes heat losses, which reduces the cost of space heating.In summer the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cooled extract air. This reduces load on air conditioners and saves electricity.In summer, when the indoor and outdoor temperature difference is low heat recovery is not reasonable. In this case the heat exchanger can be temporary replaced with a summer block for warm seasons (available separately).

   

Two built-in G4 and F8 filters provide efficient supply air filtration.The G4 filter is used for extract air filtration.

CONTROL AND AUTOMATION

Turning the unit on/off from the control panel.Selecting ventilation mode – three speeds: minimum, medium, maximum.Freeze protection of the heat exchanger by means of turning off the supply fan during defrosting.

MOUNTING

The units can be fixed to the wall, ceiling or mounted on the floor using the mounting brackets.While mounting provide free access to the service panel for filter replacement and servicing.Due to universal casing design both left and right mounting is possible. It requires swapping the service and the back panel.

Characteristics
Characteristics
Parameter KOMFORT Ultra L3 250-E S3 white Measurement unit
Voltage 220-240 V
Phase 1 ˜
Frequency 50/60 Hz
Power 176 W
Current 0.8 A
RPM 1550 min-1
Maximum air flow 81 l/s
Maximum air flow 290 m³/h
Sound pressure level at 3 m 28-47 dBА
EC motor no -
Insulating material 20 mm mineral wool mm
Transported air temperature -25...+60 °С
Extract filter G4 -
Supply filter F8+G4 -
Heat recovery efficiency 50-73 %
Heat exchanger type cross-flow -
Humidity recovery efficiency 27-45 %
Heat exchanger material polymerized cellulose -
Connected air duct diameter 125 mm
Outdoor mounting no -
Sound-insulated casing yes -
Air duct for round air ducts -
Type Supply and exhaust -
Mounting ceiling mounting, wall mounting -
Documents archieve
Documents archieve
Name
KOMFORT Ultra L3 250 S3 white - data sheet (pdf 937.83Kb)
KOMFORT Ultra L3 250 S3 white - image (png 344.58Kb)
Capacity diagram
Capacity diagram

Designation key
Designation key
Series Unit type Spigot modification Modification Rated air flow [m³/h]   Heat exchanger type Control Casing
KOMFORT Ultra: compact unit L: horizontal spigot orientation 3 250 - E: energy recovery S3: multi speed switch white: painted steel
Accessories
Accessories
    KOMFORT Ultra L3 250-E S3 white
G4 panel filter FP 240x184x40 G4
F8 panel filter FP 240x184x40 F8
Silencer SD 125
Silencer SDF 125
Backdraft air damper VRV 125
Air damper VK 125
Summer block SB C4 200/240
Dimensions
Dimensions

Model Dimensions [mm]
D B H H1 L L1
KOMFORT Ultra L3 250-E S3 white 125 300 443 43 713 810