Blauberg Iso-Mix 150
- Capacity diagram
Supply and extract ventilation systems installed in various premises requiring low noise level.For ventilation air ducts requiring high pressure, powerful air flow and low noise level.Compatible with ∅ 150 up to ∅ 315 mm air ducts.
All fans come standard with a 1.2 m lead, 2 pin plug and external two speed switching.
The casing is made of polymer coated steel, internally filled with 50 mm mineral wool thermal- and sound-insulating layer.Special inner perforation of the casing and sound insulating material are designed for wide frequency sound absorbing.Mixed flow impeller made of high quality plastic.The diffusor, the specially profiled impeller and directing vanes provide high performance and powerful pressure combined with low noise operation.External airtight terminal block on the fan casing for power supply.Mounting brackets on the fan casing for mounting to the floor, to the wall or ceiling.
220-240 V single phase at 50 Hz.All motors have a sealed ball bearing motor with a service life of up to 40 000 hours, are 2 speed with an exterior two speed switch and can be fitted with a speed controller.All motors have manual reset thermal overload protection as required for inline duct fans AS/NZS60335-2-80:2004.
Due to its compact design the fan is the ideal solution for mounting in limited spaces.The fan is suitable for mounting in any section of the ventilation system from intake to the end of the ductwork.
|Parameter||Iso-Mix 150 max||Iso-Mix 150 min||Measurement unit|
|Maximum air flow||153||114||l/s|
|Maximum air flow||550||410||m³/h|
|Sound pressure level at 3 m distance||43||38||dBА|
|Max. operating temperature||+60||+60||°С|
|Ingress protection rating||IPX4||IPX4||-|
|Motor IP rating||IP44||IP44||-|
|Casing material||polymer coated steel||polymer coated steel||-|
|Air duct||for round air ducts||for round air ducts||-|
|Type||Exhaust, Supply||Exhaust, Supply||-|