Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy
Language: EN

Blauberg EKH 150-1.2


Duct electrical heaters.
EAN codeEAN4058448031595
  • Description
  • Characteristics
  • DIMENSIONS
Description
Description
APPLICATION

For warming up of supply air in heating, ventilation and air conditioning systems installed in various premises.Compatible with Ø100 to 315 mm round air ducts.

DESIGN

Galvanized steel case and junction box.Heating elements made of stainless steel. Airtight connection with air ducts due to rubber seals.Several power options for each standard size. For higher heating capacity several heaters may be installed in series.Equipped with overheat protection thermostats:
– basic protection with automatic restart at +50 0С;
– emergency protection with manual restart at +90 0С.

MOUNTING

Fixing to round ducts with clamps.  Any mounting position except for the junction box downwards to prevent condensate leakage and short circuit. Install a filter upstream to the heater to protect heating elements against dirt ingress.Recommended distance between the heater and other system components must be not less than two connecting diameters for air flow stabilization.Duct heaters are rated for minimum air flow speed 1.5 m/s and maximum air temperature supplied to the units 40 °С. In case of speed regulation with a speed controller the minimum air speed through the heater must be provided.For correct and safe heater operation an automatic control and protection system is recommended including the following functions:
– regulation of the heating capacity and temperature of the air heated up;
– filter clogging control by a differential air pressure sensor;
– power cut-off in case of supply fan shutdown or low air flow speed as well as in case of actuating the overheat protection thermostats;
– heat removal from the heating elements after ventilation system shutdown.

Characteristics
Characteristics
Parameter EKH 150-1.2 Measurement unit
Voltage 230 V
Phase 1 ˜
Power 1200 W
Total unit current 5.2 A
Minimum air capacity 120 m³/h
Number of heating coils x capacity 1х1200 W
Casing material galvanized steel -
Air duct for round air ducts -
Connection diameter 150 mm
Weight 2.5 kg
DIMENSIONS
DIMENSIONS

Type Dimensions [mm]
D B H L L1 L2
EKH 150-1.2 149 120 255 306 226 40